First, listen to what buscht has to say.
Now, we don't know what kind of parts your making, which can make a BIG difference in choice of machines, but you might want to look at a Shopbot. 600ipm cutting speeds and 1800ipm rapids, although you'd probably need to upgrade to one of the expensive spindles to take advantage of that cutting speed.
__________________
Gerry
Mach3 2010 Screenset
http://home.comcast.net/~cncwoodworker/2010.html
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management) |