Originally Posted by dahui Hi,
I'm pretty sure you can find dimensions for building a table if you download the parts manual from the Shoptask website.
Let me know if this works. I know my paper manual has a dimensional drawing for the bolt holes at least. However, who knows what machine the drawing is for. What model Shoptask to you have? |
I'm running one of the 17-20 GOLD SERIES Machines. I say running, but haven't had much chance to really use it, as I've been too busy working (Automotive Electronics/Instrument Supplier In the metro Detroit area), raising My kids, and just trying to make it to the next paycheck!
Now that my kids are older (High school) and things are a little bit slower around here, I'm trying to get the shop task out and more easily available/usable.
I've built one of Shumatech's DROs for it and bought the quill scales for X,Y, and Z. Now I'm looking to build a better work bench for it, and move it inside(Basement workshop=Warm in winter!!). It'll have to be taken apart to do this, and re-assembled on the new bench down here in the basement.
I'm D/L'ing the parts manual & Shop guide right now and hope it has what I need in it.
Thanks for the info!!!!
I'll post how it goes!!
-Tall Shadow