Hi all,
I'm new to machining and this forum. I just got my machine in January. My Shoptask is not CNC'd (yet) but this is probably the most active forum I've found related to the shoptask.
I had some trouble finding good/current information on the Shoptask while I was researching what machine to get and trying to figure out what I'd need to set it up. As Bloy2004 suggested I used an excelent guide by Tangoromeo. Of course now the Tri-power is out, so I guess new buyers are on their own again.
Anyway, since there was so little current info out there I decided to put up my own site. Not a guide really, just some observations on my experience.
Right now I'm working through some motor problems. Thanks in advance for checking out my site.
www.the-alchemist.com