So I take it he needs to update the software along with the post.
I know that Paul from Post Hast can help with the post.
But if he does not have the tool in the software ,This will not really work well.
Turbine you should really think about the last thoughts from Gibbsgod,As a Software dealer I to have seen this to many times.
Some times you have to spend some to make some but in the long run you will be WAY better off.
JM2C
__________________
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
Cadcam
Mastercam Instructor , Programming Consultant and ME (Manufacturing Eng) |