Originally posted by hardmill
Sorry I did'nt get here sooner rekd'.
Looks like a nice project ya got there. How big(or small)
are the fillets vesus the depth of pockets?
If you can send me the file and i'll look at it.
I can point you in the right dir. for tools to.
BTW what type of machines are you using out there?
PEACE |
Thanks hardmill. I figured you were prolly busy like a mofo or you'd have piped in long ago.
The doc to dia is about 6 to 1. I've done much worse in alum, brass, and some mild steels, but 36% nickel makes me a tad nervous going that deep. I'll be pre-drilling the corners out. I'll see if they gave me the database yet and send it over.
We're using all HAAS'. Hogging = bad
'Rekd