Re: Bid High And Hope You Don't Get It.! | |
Originally posted by wms
Rekd,
Here's a link to Carpenter metals , some info on milling< not much.
Maybe you could call them and see if you can get a hold of "smart" app. engineer.
Or get your hands an a piece and see how it goes. Better to try it first hand then you will know.
http://crswnew.cartech.com/wnew/tech...s/TA00018.html |
Thanks, wms. I can prolly talk a vendor into sampling me a piece for free. Good idea.
'Rekd
__________________
Matt
San Diego, Ca
___ o o o_
[l_,[_____],
l---L - □lllllll□-
( )_) ( )_)--)_)
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management) |