The problem we are having is that we bought this machine after it was retrofitted with the autocon controller.We have been trying to get post processors to write programs with no success whatsoever--we bought the we-cim programming software and they have pretty much given up on our problem as well--all we hear from them are a bunch of empty promises with no results!We can't get the machine to do hardly anything and i thought maybe the parameters would be a place to start troubleshooting--we're getting to the point where we NEED this machine going.To answer your ? this controller is capable of milling and lathe work also--it has way more than we need to run the WHITNEY which is only a punch/plasma.
Last edited by jsasker; 10-06-2003 at 06:53 AM.
|