Originally posted by Buried
First question is = do you have your hasp plugged into the computer?
2nd, I wouldn't be posting the file to the floppy, I would post it to your hard drive and then copy it to the floppy afterwards. This way there's no need to repost the program a week later when you need to run it again and you've already written over that program on the floopy. |
Good point, also, when working with floppies, the system tries to read from A: because of the 'recent documents' function, which slows down the time it takes to process things when there's no floppy in the drive. (You'll be able to hear it hitting the drive if this is happening.
'Rekd
__________________
Matt
San Diego, Ca
___ o o o_
[l_,[_____],
l---L - □lllllll□-
( )_) ( )_)--)_)
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management) |