Question? Are you going CNC with this guy or are you staying with cranks?
If you are going CNC you are going to want the VFD as close to the PC as possible so you minimize the potential for noise getting into the system. This assumes you want the spindle speed under computer control. That means the VFD goes in the control box and the control buttons & such go on some kind of remote panel mounted right where the VFD is now.
This is THE most pristine machine that I have EVER seen!!! Very nice work on the machine AND the shop.
Best,
-jd
__________________
John Delaney
www.rwicooking.com |