Hu's right. It's called backposting or backplotting.
I use Ver.18 everyday to program my Haas VF-3 and the backpost(generate geo) is an excellant way to double check your program.
It's located in NC Cam, bring up your program,go to edit,click "select all" icon, go back to edit, click on "generate geo" and presto!
Also, keep in mind that "WMS" or "Ward" on this site is a Haas user. He too provides alot of good useful tips.
If I left out any other Haas users, sorry. Jim Jacobs. |