Thanks Balanceguy,
Looks like I'm gonna throw an offer at the guy who has it by the end of the weekend. I'm starting to hear really good things about these machines from people who have actually ran them. The only thing I can't figure out is how much memory it has, but anyway it seems to be a good amount. My only concern now might be complex 3-D mold type work, but even that most say doesn't seem to be a problem if you slow it down and let the control have a little time to process the info, so I'm told. Anyway I think I'm sold on the machine and as far as machines that will fit through an 8 ft door, it seems to have quite a bit of travel compared to others. Any additional info from anyone who owns this machine or has run this machine is of course greatly appreciated. Thanks to all, Mike. |