Hi Folks, im new to the board, just starting out. Got a 3 axis Xylotex kit with the nema23 269oz motors. Going to be putt'n them onto a Sherline 5000 little tabletop mill.
I do not have a wiring diagram on the motors, and have been unable to find them online. The board is marked with Axis (ZA, ZA#, ZB, ZB# ECT.) and the moters have 4 wires out Black, Blue, Green, Red. I didn't want to hook anything up until I can find out which one is which
Thanks for any help,
-John