I use 4 flutes almost exclusively for finishing microwave housings, (brass and alum) and other critical surfaces where I want to move quickly.
'Rekd teh 'Beep Beep'
__________________
Matt
San Diego, Ca
___ o o o_
[l_,[_____],
l---L - □lllllll□-
( )_) ( )_)--)_)
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
Last edited by Rekd; 09-12-2003 at 12:47 AM.
|