[mace]

This is what i am talking about in this exploded veiw
Green = stock part was once rectangle in the begining of nc program

Each sequence has removed material from stock.

If i go back to seq 3 material removels from 4 to end of part become blanked you cant see them if i do a vericut nc check in seq #3 all models all AUTOMATICLY exported to vericut g code is loaded and material removels are suppresed (blanked ) from 4 to end of program this allows you to watch one seq. cut at a time. And NOT have to watch the whole operation (which is to time consuming.



As for Cadcams statement " any system will machine those same toolpaths. "

You are incorrect Myself and 4 other programmers have been tying all morning to get a similar toolpath in MasterCam 9.0 is failing during 3 degree ramp in to 2 pockets and cuttercomp on 6 different features we program pockets in mastercam one at a time for this reason quit time consuming.

Ok rather than doing feature by feature comparison of cam sytems let me to the best of my ability try explain the basics of pro nc.

As i feel like i must answer all remarks about what i am demonstating it is to time consuming

The reason for these posts are to Educate anyones interest in this product.

P.M. me if you would like detailed graphic info by email