Hello..
You need to describe your problem if you want someone to offer some ways to solve it... |
Thanks a lot for the advice..
Actually, I got a lot to understand about the stepper motors, what's to plan next.. and so on.. just because i start from scratch..
Here a few pictures about the small cnc machines I built a few weeks ago..
About the hardware..
The instruction about 'how to make it', I follow the instruction on the book..
CNC Robotics: Build Your Own Workshop Bot (TAB Robotics S.)
Book by Geoff Williams
But the hardware build actually suitable for bipolar motor, interface with KCam4 software..
But I'm not really sure is it could work with unipolar or not..
Try and error..!
