HU,
I know what you mean.
I always just used a small cutter and a small step over to make "sure" that it was really close to the model.
But this always added extra (read: wasted) time to machine.
With the rest robot and the nc manager you can use larger tools and then see the results. And if needed you can drop in a smaller tool to clean up areas that need work.
And best of all it only goes after the parts of the model that need to be reworked. (read: no wasted cutting) Cool.
Got to love that.
__________________
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management) |