Behind the machine, there are 2 guages, the air guage is on top of a black round solenoid looking thing. It will say psi on the face of it, small letters, and should read between 80 and 100 lbs.
Make sure your compressor is outputting enough.
'Rekd
__________________
Matt
San Diego, Ca
___ o o o_
[l_,[_____],
l---L - □lllllll□-
( )_) ( )_)--)_)
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management) |