Mori Seki SL15 or SL25 MC you can find a good used one for 50 to 80 grand, Mori is a pretty good machine I have used them for 25 years or so. Here is a link to a sight that handles only used Mori. I have personally used both of these machiones and can tell you that they will what you need them to do. Now as far as CadCam software Mastercam is the best at about 15 grand a pop, If that is more than you can spend check out BOBCAD they have a link some place on this sight. It is much cheaper but has some pretty good functions.
http://www.equipmentmls.com/manufact...ORI-SEIKI.html