These parts will be made out of plastics preferably composites for educational use and composite analysis. No inconel or aluminum. I cannot just buy parts from turbo venders because they are not made of composites they are made of iconel and aluminum which is the last thing i need. I posted up in the Rfq zone i got 8 reply's for an rfq 3 already said that they cannot do it. Just waiting for others. I had a guy in maylasia charge me super low price however hes not responding anymore i dont know what happened to him or maybe hes busy $500 bucks per part was his quote which was pretty good but that is out the window possibly. I think i made a mistake dimensional tolerance (bare with me im a newbie) +/- 0.001 bores was +/- 0.0002. What are the typical tolerances of an investment cast if they are less tolerance i might consider machined parts to investment cast tolerance. |