oh, yeah specs on it would help huh ? ....sorry long day...
It's a Speedway Series Mill, from harbor freight. It's rated at 4/5ths of a hp. It has 2spds, and 0 to 2500 rpm variable speed adj. Nice solid little unit, fairly accurate, about as good as it gets for the pricetag. I've had up to a 3/4 " end mill 4 flute running nice and cleanly through .250 depth in a single pass, with no problems what so ever. It takes a R8 collet with a jt33 taper.
The stuff I've been working with the most has been some 1/4 and 3/8 " thick plate 6061....and more recently .125 thick aluminum plates.
hope this answers some questions...
-arthur |