hi the finished table height will be 700mm to the top of the cutting surface ididn't want to have it any higher then that because it would be to hard to reach the centre of the table. i am planing to cut 1500x3000x12mm sheets of m/s max. the table travel is 1800x3300x220mm i have bought 3 x 6' lengths of igus chain these are the spics- open style side hinge cable and hose carrier 1.38"H x 2.87"w overall sz. 3.94" bend radius they cost me $90US each plus mounting brackets $27US a set. i bought these from mcmaster-carr
Last edited by terrydullaway; 10-02-2005 at 05:05 PM.
Reason: spelling error
|