I use a z.bavelloni EGAR 320 router CNC. 7'X11' working table size. Internal and external water cooled for the tools. Have been working production with it for 2 years now. The tools/types of tools abound for this application AKA Natural Stone. What I have found is that the Vincent Tyrolit diamonds are the best. Any profile you want you can get... However 2 1/4" is about as thick as your going to want to fabricate on the CNC because it was initially designed for glass but retrofited for stone... So as you can imagine... 2 1/4" thick of granite is a good load for it... But possible.
Thoth |