Guys thanks for your previous help . so here I go again.
WE have most all of my stuff now. Questions: Our Stepper motors are wired in series 2.3 amp , 1.52 ohms, 6.0mh. can I run 16 ft on 22 AWG wire and do I have to stay away from the AC.line right now they are bundled ??? Using xylotex controller, what do I have to do to get funtions like spindel on , pause /hold /stop ,E stop ect to function from the PC key board . Will be be using Mach 1or2 CNC.Would SSR(solid state relays) be used and drivem from the 10 pin connector above the IDC26 on the xylotex board ??
Thank again
Cecil
__________________
cecil |