It works!
I managed to finish the Y axis. It took some time to "dial" it in since I don't have the proper tools for that. I have been looking in the local stores but couldn't find one. Does anybody know where to get a dial online?
I hooked both the X and Y axis up to the hobbycnc controller. With a few pieces of acrylic and some glue clamps I managed to fix a pencil to the Y axis. I have to admit I got pretty nervous when I executed the first piece of g-code. My finger never left the escape button!
Even with one axis still missing and a simple piece of paper and a pencil the result was pretty nice. Only a pitty that the pencil was fixed and the line fades after a few centimeters. I've attached a picture of the setup and my first result. I can't wait to finish the z axis and cut my first part.
Dimitri