Not sure where to look, but I'm sure a search on google will find some good results.
Bevels, chamfers cannot be done on water jet. It's very simular to laser jet, in that it is 2 dimensional. (Unless they've come out with a rotating head, but it doesn't seem feasable.)
'Rekd
__________________
Matt
San Diego, Ca
___ o o o_
[l_,[_____],
l---L - □lllllll□-
( )_) ( )_)--)_)
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management) |