I know these questions may sound stupid to you guys, but I want to make sure I don't screw up on the parts and end up frying my freebie 3977's
On the parts lists, alot of the stuff doesn't really give that specific of a name for what the item is, I know enough to tell that something is a cap or a resistor, etc but there are so many variations of each little thing that i want to make sure i get the right type, values aren't a problem
those are labeled beautifully. Just wanting to make sure i get the right things.
all of the 50v 2.5mm caps on both parts lists, can those be monolithic ceramic caps?
do resistors really matter 1/8w vs 1/4w?
i think thats all i will bother you guys with for now
[edit]
ok so i lied....
is it ok to substitue a 51.1k metal film resistor in place of the 51k carbon film? all futurlec has is 56k carbon films
[edit again]
i should have waited till i got through with the parts list before i posted LOL
on the schematic and pictures for the driver it looks like there are 2 pots R10 and R16 with the same numbering in the pic. but the parts list only shows one R16. is R10 correct on the parts list and supposed to be a regular 4.7k resistor or is it supposed to be a 10k pot like R16?
[edit yet again]
looks like the only thing left on the parts list i'm not sure on if the things i have mentioned above seem ok is the 2w .2ohm smd resistors that futurlec doesn't have... i really don't wanna pay $5 shipping from mouser for em LOL
is there anything that futurlec does have that i could use?