Motor and drive matching document | |
Gentlemen,
I'm not sure what you are referring to regarding the scripting on the web site. Although the documentation is not complete yet, it is coming along. I have a rough draft of the first part of the Setup and Tune document for the 2000 series that is not posted on the web yet. I can forward it to any user in its draft form for his own use.
I want to encourage you to download the Motor & Drive matching document which is now posted on the Rutex.com web site under products, and under R2000 Step and Direction products. It will be very helpful to you in building your machines.
Tom Eldredge
Rutex LLC
__________________
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
|