GRATE SYSTEM PLANS TO SUIT PLASMACAM & SAMSON - CNCzone.com-Classifieds Buy and Selling

Welcome to the CNCzone.com-The Ultimate Machinist Community forums.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!

If you have any problems with the registration process or your account login, please contact contact us.

Notices

Start adding your videos from youtube and other sites here- http://www.cnczone.com/forums/video.php

Forum

Home · Search · Register

Statistics
Users	104,020
Active Ads	304
Comments	290
Views	516,822
Items Sold	774
Value of items sold	$1,899,381

Random Ads - Mics

GRATE SYSTEM PLANS TO SUIT PLASMACAM & SAMSON
Benderart

CNC Parallel Port Breakout board
p-cad

Delrin, UHMW, Nylon, Teflon Offcuts
surplusdealdude

KB Electronics KBMM-125 DC Motor Speed Control
jjwl89

Various Connectors
politecnica

· more ·

Most Viewed
Parallel Port Interf...	15,073
V-GROOVE BEARINGS NE...	14,211
gecko drives, steppe...	10,151
Linear Rail, Block, ...	9,019
SLA7062M Unipolar Mi...	8,406
Self Centering Tap W...	8,208

Closing Auctions
cnc supra 9h 10m 44s USD6,025.00
Mori Seiki NL lathe holders 1d 5h 10m 43s USD1,000.00
CNC Router Parts 19d 10h 22m 44s USD750.00
ZX6350C extended , new, 2005 m... 89d 16h 52m 58s USD5,000.00
CNC Job Opportunities 9171d 22h 47m 32s USD0.00
TRAK Retrofit Kit 9269d 22h 7m 10s USD999.99
3- DC Servo Motor Shinano Kens... 9294d 2h 54m 18s USD50.00
3- DC Servo Motor Shinano Kens... 9294d 2h 57m 30s USD50.00
gecko drives, stepper motors, ... 9340d 30m 39s USD460.00
SHMS1325C,SHG0609,SHM1325,SHJ1... 9450d 8h 18m 58s USD1.25

Home » Items for Sale » Mics

GRATE SYSTEM PLANS TO SUIT PLASMACAM & SAMSON

Quantity	Views	Date Posted
1	1152	Thu May 8, 2008

Asking Price	Condition
$15.00	Excellent

supersize	supersize

Description:

I recently upgraded from a Plasmacam to a Samson table and cut a lot of heavier materials and, as a consequence the original grates were trashed inside three months. The main problem is, too much heat is transfered into the upper level of the grates, causing them to warp upwards at the outer edges. (This also happens when cutting thinner materials but, to a lesser extent, due to lower amperage settings) This became a real problem for me, trying to level large plates so I've designed a new "sacrificial" system that is strong, practical and easy to install and replace. Included are a PDF instruction sheet with photos and, PCM plans for both PlasmaCAM 4x4 & Samson 5x10 tables. All you then have to do is, cut the support frames on your PlasmaCAM or Samson table, then cut 2.5" x 1/8" (65 x 3mm) flat steel strips to length and fit in the frames.....Easy!!!! The slats are curved across the table and, are a sloppy fit in the support frames making for easy installation and removal however, the natural spring in the steel slat holds them in place very well. The curve across the table prevents you from following the grate when cutting straight lines, instead you're generally only crossing the slat, causing a lot less damage. When the slats do eventually become damaged, it’s easy to run a flap disc over the top surface or, remove the offending slat and run under a linisher. It’s also easy to clean slag off the slat, simply by removing and "stropping" with a half round file or similar. When the slats become unusable, simply replace as required. The grates run at the same height as the originals and, the support frames also retain the table edge location slot however, instead of the standard grate stop, you can use a length of 3/4" x 1/8" FMS (as shown in the photo) This is a simple, easy to install system that will save you money & time, save you the hassle of warped grates and, make it an easy task to replace once the slats become damaged beyond repair, something you won’t need to do for a long time. One other bonus of this system is, because the slats are full width and only 2” (50mm) apart, they also tend to prevent tip ups. Plans are supplied to suit both imperial and metric sized materials. (2.5” x 1/8” Vs 65 x 3mm) Sure, you could look at the photos and decide to copy the concept but, what is your time worth?? For a measly $15.00 all the measuring and design work is done, all you do is cut and fit….what could be more simple?? Payments can be made via PayPal and, once the payment clears, the plans and PDF will be emailed to your nominated email address. Thanks for looking.

Keywords:

GRATE SYSTEM TO SUIT PLASMACAM AND SAMSON

For Sale By
	Benderart		Posts: 0 Registered: October 2006 Location: Australia Ads from this Seller Contact Seller

All times are GMT -5. The time now is 01:29 PM.