Summit Dana Bandit CNC Controller

see ebay listing: Item number: 130576777733 http://www.ebay.com/itm/130576777733?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1555.l2649

Summit/Dana Bandit CNC controller removed from a 1980’s Shizuoka AN-S milling machine. I bought the mill on ebay a few years ago to retrofit a modern control and removed the Bandit and now need to clear out the warehouse and get rid of it.

I powered up the mill and control a few years ago before removing it and the front panel LEDs illuminated, but the servo motors did not spin. It’s now disconnected from the servos and I powered it up and the front panel LEDs no longer illuminate, but a red light on the power supply comes on and I hear some relays shifting. All the boards and components are in good physical shape and there is no obvious damage. I never disassembled or removed any of them. It is covered with a light layer of dust. The lid for the case is missing. I can send further board SN info or pics to help answer your questions.

I will ship within two days of receiving payment.

I can package it in a card board box for shipping UPS ground, or band it to a pallet if you prefer a freight line, for no charge. Full crating is available for a fee. No shipping charge for local pickup.

For questions contact Doug, 404 667 4680, wddanielson@hotmail.com

Details:

Manufacturer: Summit Dana

Model Number: 21-300-23

SN: 03545

Input: 120 vac, 60 Hz

Weight: ~100 lbs