Acetal/Delrin Flange Nut for 3/4" - 6 TPI ACME and 1/2" - 10 TPI ACME Threaded Rods/Leadscrews. Both sizes are available. Manufactured by CJA Masterworks. Buy via this listing or visit our website at www.cjamasterworks.com to buy or for more info. Order multiple flange nuts and we'll combine shipping.

Close tolerances eliminate backlash without the need for a special anti-backlash nut. Tough acetal material withstands thousands of hours of use when used with quality leadscrews. Acetal Flange Nuts have much lower coefficient of friction compared to brass or steel which will not only make your setup more efficient, but also virtually eliminate wear on the leadscrew from the nut. Guaranteed to have less than .001" backlash when used with quality leadscrews. Satisfaction guaranteed or your money back, no questions asked.

1 Flange Nut per Package

Specifications:

• Flange Major OD: 2.000" /- .025"


• Flange Minor OD: 1.125" /- .005"


• Overall Length: 1.875" /- .050"


• Internal Thread: 29 Degree ACME 3/4-6TPI or 1/2-10TPI (Specify thread when ordering from this ad)


• Bolt Circle: 4 on 1.59" for use with #10 Socket Head Cap Screws