This modle adopts  three-phase motor and driver ;high-speed outside Rail ; high speed USB 2.0 data interface support ,32M high speed DSP controller .Applied in clothing ,fabric ,leather and other Soft materials .

Specification:
Laser- type：CO2laser beam
Laser power：60W
Engraving area：600X400mm
Engraving speed：0 - 1000mm/min
Cutting speed：0 - 800mm/min
Resetting position accuracy：± 0.05mm
Controlling system：DSP
Cutting thickness：0-30mm(According to imaterials)
Cooling mode：water-cooling and protection system
Gross power：≤1250W
Working voltage：220 ± 10％，50HZ（60HZ）
Operating temperature：0℃-45℃
Operating humidity：5％-95％
Controlling software：DSP
Graphic format supported：BMP,PLT, DST, DXF and AI
Net Weight：200KG