This unique new accessory turns your workshop drill press into an efficient plastic injection molding machine.    You simply supply the drill press and mold clamp.   The PIM-SHOOTER™ starter package gives you EVERYTHING ELSE you will need to immediately start producing your own plastic parts.

If you are designing prototype parts, this machine will save tons of turn-around time waiting for the parts to be made by an outside firm.   Or you can use this fun machine to make money producing small plastic parts and selling them.   This machine could easily pay for itself on the very first project!

Runs on 110v power and only uses 200 Watts.  The temperature range is adjustable from 0-440 deg. F.

Your purchase includes all this: 

* Drill press mounted injection machine 
  (NOTE: The drill press and mold clamp must be supplied by the buyer!) 
* Digital temperature controller 
* 24-page detailed instruction manual 
* 16 oz LDPE plastic resin pellets 
* 10 oz black polypropylene plastic resin pellets
* Safety glasses and gloves 
* Purging block and nozzle centering ring 
* Pellet dispenser jar (dispenser style may vary)  
* Sample mold so you can start molding your own parts immediately.

Can inject a wide variety of injection resins including but not limited to:   LDPE, POLYPROPYLENE, ABS, ACETAL, DELRIN, TPE-ELASTOMER(SOFT RUBBER-LIKE PLASTIC) + MANY OTHERS.

To See video: CLICK HERE

More information is available from HERE.

You can even use this machine to make your own fishing lures!