This machine has been flawless and I hate to see it go but I am moving to a smaller place and will not have room for a full shop. I have babied this machine and have upgraded the spindle drive to the digital controller. Everything is in great condition except for a mishap with a drill, feedrate and the Z axis :- ) – I plunged a 1/4" drill bit into the bed about .400" deep as seen in one of the pictures. This won’t affect the machine at all but don’t want to leave anything out. I also added a 3 outlet coolant system with valves to control volume and Dynamat to key areas to dampen sound.  Cosmetically there is a scratch in the front as seen in the pictures.

I am in South Charlotte - 28277, feel free to email me for more pictures or stop by to take a look. I will be happy to help move the mill too.

Included with the machine will be everything you see in the pictures as listed below:

CNC Operators tooling set

2 x 3/8” Set Screw Tool Holders

2 x 1/4” Set Screw Tool holders

4 x 1/2” Set Screw Tool Holders

3 x ER20 Collet Holders

9 of the most popular ER20 collets (3 ea of 1/8”, 1/4”, 3/8 ” )

4 drill chucks and JT adaptors

8” Digital Height Gauge

Compact Granite Surface Plate with integrated locating hole

Precision TTS-R8 collet

Wrenches and installation tools

PC controller from Tormach

Monitor

Monitor arm and tray

Tool holder arm and tray

Operator stand

Lift bar

Tormach vise

Hold down set

½ gallon Vectra way oil