Hurco SLV 40, could be used for a parts machine or repaired, we are replacing it with a new machine and need to move it out. If party would want to just remove the parts that they want and then have us scrap the rest that is possible also. The Z axis Ballscrew was rebuilt about 5 years ago, spindle works well and runs at 10k, has spindle chiller, Y axis is a newer Baldor motor, Z axis motor works fine, X axis is suspect problem with calibrating the machine during startup. Not sure if it has a problem with the circuit board, or it is just the X axis motor and endcoder. Has the Max 3 control, axis drivers have been upgraded about 8 years ago.

Call Lee 5174391062 if you have any questions.