Price Reduced!

I purchased this Logan Model 200 metal lathe from a good friend of mine who had been keeping it in his enclosed garage since his Grandfather passed away several years ago. The lathe is in excellent working condition and includes many accessories which are listed below. While we don't have an original copy of the instruction manual, we have found a copy for this exact model online. Please email us to request a copy of the instruction manual if you wish to view it.

In addition to the parts listed below, there is a milling attachment that goes with the lathe. The milling attachment was made by Globe, and appears to fit this lathe. It came with the lathe and was owned by the same original owner of the lathe. It appears to be in Fair condition, the only potential problem with the milling attachment is a bad bearing in the spindle as the spindle is hard to turn by hand. It's a little different than some other milling attachments that I have seen because it uses a pulley connected to the lathe spindle to drive a secondary spindle that is part of the milling attachment.

I bought this lathe with the intent of reselling it after cleaning it up and checking the mechanical parts. The original owner, my friend's Grandfather, took extremely good care of all of his tools including this machine. Really a great machine!

The specifications for this lathe were not available from the manual and were measured by me, or taken directly from plates on the machine itself.

Shipping is NOT INCLUDED in the price listed here! Please contact us to arrange for shipping or for direct pick-up.

Accessories and Features:

• 12 Spindle Speeds: 30, 56, 70, 104, 131, 179, 244, 334, 420, 620, 780, 1450


• Full set of change gears for all feed rates listed in manual.


• Adjustable Toolpost with Multiple Tool Holders.


• 3 Jaw Chuck w/ 5" OD and 1-3/8" ID


• 4 Jaw Chuck w/ 8" OD and 1-1/2" OD


• Faceplate w 6" OD


• Tailstock w/ 3" Travel (see specifications below)


• Steady Rest


• Original Chip Tray


• Original Legs


• See images for additional accessory items not listed here such as chuck wrenches and more.

Specifications:

• Input Voltage: 110-120VAC


• Input Amperage: 10 Amps (est)


• Distance Between Centers: approx 27"


• Swing over Bed: 5-1/4"


• Swing over Cross Slide: 3"


• Distance Through Headstock: 12-1/2"


• Spindle Bore Dia: 13/16"


• Tailstock Taper: MT2


• Tailstock Quill Travel: 3"


• Number of Leadscrew Feed Rates Available: 46


• Cuts Standard Threads Per Inch: 4 TPI through 64 TPI (contact us for manual for full details)