2008 C.R. Onsrud 96C18 4x8 Super Duty Router w/extras

Serial# 96030401

Machine has 6 hours of use and is in absolutely perfect condition

Clean enough to eat off of

See below for details of what is included

Bought new from C.R. Onsrud in 2008 for $151k.  You could buy this entire package new right now for a little more than that or buy this one for a heavy discount.  You’ll get the same quality and functionality either way

What’s included:

-CR Onsrud 96C18 4x8 Super Duty Router w/ 61”x 98” axis travel

-40hp Dekker V-Max Liquid Ring Vacuum Pump- 550 CFM system @ 29”/hg

-20kva Isolation Transformer

-3- Extra HSK-63 Standard Tool Holders w/1” collet capacity (with chuck nut)

-Dust collection stanchion kit (includes flex hose, 1 steel stand & clamps to connect dust transition to your collector above the center of the machine footprint)

-CR Onsrud Digital Bench-Top Tool Setter (allows you to measure tools off-line in seconds and be ready for the next job while the machine is still in production)

-CR Onsrud Cutter

-AlphaCAM Basic w/MultiDrill software (supports ATC & supports multi-spindle drilling/boring, includes basic CAD functions, Alpha-Edit, .DXF import, post processor & will run VBA macros)

-Owners Manual

-2- HSK standard tool holders

-2- Bearing Chuck Nuts

-2- Collet wrenches: 1 rego fix spanner wrench and 1 1-7/16” open end wrench

-2mm-8mm folding hex key set

- roll of 4508 closed cell vacuum tape

-tube of ball screw lube

-M20 x 60mm & (4) M20 X80mm Leveling bolts w/leveling nuts

-Emergency shut off cable, tension spring, tension screws

Specs and what’s included with the 96C18:

61” x 98” axis travel

Thick cast iron fixed bridge & cast iron vertical supports, thermal heat treated, stress relieved & normalized one-piece, steel frame base; fixed bridge, twin moving table design with 3600” per minute machining speed, full 3-D capability, 14 inches under bridge clearance & 11 inches of Z axis stroke, 10’ x 12’ footprint, precision ball-screw drives for ALL axes, precision linear guide ways, centralized lubrication system, 4-pole, 13.5Kw, 18HP- 24,000RPM fully programmable & reversible, variable speed, quick quick-change spindle, with air blast, capable of routing & drilling, programmable feed rates with override capability, 12 Tool-Automatic Tool Changer, Twin aluminum tables function as two independent 48” x 48” tables or can also operate in tandem as a single 96” x 48” table, with full table coverage.  Each table has low vacuum sensing safety shut-off with override capability. Includes all switches, valves, gauges, safety interlocks & vacuum plumbing necessary for either suck-through or dedicated spoil boards and is easily modified for the use of pod systems.  All tables include pressure sensitve safety-stop/ emergency stop bars along the front and rear.  Machine is surrounded by a 360 degree emergency-stop cable. 

Outfitted with:

12- Tool Dynamic Automatic Rotary Tool Changer- Fully Servo controlled instead of Stepper controller.  Design eliminates misfires & quickly changes between 12 different tools- Able to store aggregates.  You may require C-axis or aggregate tool changer option to hold some larger or non-standard aggregates

Pneumatic Controlled Vacuum Switches- Controlled via pull switches on AMCB&R equipped machines.  Controlled via either touch screen or M-code on OSAI machines.

Dust Transition Kit- (appropriately sized dust transition provided for connecting to your dropped-in flex hose) 8” transition for router head only, standard machines.  12” if drilling block, boring block, retrofit kit or c-axis is added

Onsrud AMC-B&R Handheld- Automatic handheld machine control system, with 4 port Ethernet connection, USB connectivity, serial connectivity & VNC-PC front link.  The integrated VNC-PC front software & interface is onboard and included on every AMC-B&R to allow a user provided PC to be easily & seamlessly connected without compromising reliability, functionality or safety.

CR Onsrud- Aluminum Universal Vacuum Table System- Standard on all moving table models, includes: oversized 4” intake manifold, high capacity vacuum plumbing, high flow 1” aluminum grid waffle patterns.