makeCNC.com

PRESENTS

please note this is a one off machine no others will be listed

This unit is a Sieg(Grizzly) X3 larger benchtop Milling machine (was a New Grizzly)  That has been professionally converted to CNC!

all the hard work is done!

It has super high quality Nook ball screws and bearings with high torque duel shaft 400 oz steppers and aluminium graduated handwheels to allow manual control of the X & Y axis.

It has a large 800 oz nema 34 stepper for the Z axis

It comes withn a PMDX 131 4 axis mother board and 3 Gecko drives as shown in photographs.

You will need to wire it up with a power supply you can find these readily available on ebay for under $100.

It has an R8 spindle giving access to inexpensive high quality tooling.

This machine is new but being sold as used due to to conversion.

 This machine will work fine with MACH 3 software available from our webstore at Makecnc.com.

The machine you see in the photos is what you get except the hand tools shown etc.

|This unit is nearly ready to run!  It just needs to be wired up and tuned (setting the gibs etc) The motors already have cable plugs wired and I will supply the female plug to wire to the mother board and drivers.

This machine is big and very heavy over 500 pounds so is pick up only in st cloud minnesota  or will have to be shipped in a wooden crate on a pallet by your own shipping provider.

There will be a charge of  $100 dismantling and crating and pallet fee if you want me to get this machine ready for your shipper to pick up

You will need to understand enough about machines and this mill to reassemble it when it arrives  as I will not be giving support to reassemble it although I will supply a user manual for the original Grizzly x3 that will make that a doable process for you.

I am selling this and the x2 mill also listed on ebay as they were originally going to be used as show models but I decided to move more into the software side of things.

For information on the basic X3 machine before conversion to CNC  please see the URL below

http://www.mini-lathe.com/x3_mill/X3rvw/X3.htm

Thanks for looking!

all sales final. no returns.

SORRY NO INTERNATIONAL SHIPPING OTHER THAN  CANADA

CANADIANS  EMAL ME FOR A QUOTE

You will need to supply a computer.

There are many free software programs available on the net to use with this machine.

This bench top CNC Mill is excess to our current needs