CNC Bench Top Mill
Complete “turn key” set up
Comes with Windows loaded computer and stand to control the machine
Runs with Mach 2 Software
Travel: X axis 15.875”
Y axis 5.625”
Z axis 4.750”
¼ hp servo motors
Hand pump oiler to lube X & Y axis’
5/8 diameter ball screws
2 hp Spindle Motor
VFD (variable frequency drive) for spindle motor 3000 RPM’s
Timken Spindle Bearings
Custom made Z axis yoke with lower bearing cooler
Flood coolant set up - Coolant turns on and off with M-code
Heavy duty stand made from 2” x 2” x ¼” steel tubing - Welded construction with leveling screws
¾” thick bolster plate bolted to table forming base of “fish tank” to help contain coolant and chips
2 - 4” vises included
Power requirements:
Spindle: 220v 20amp single phase
Servo Motors: 120v 15 amp
This is a complete” turn key” set up. It is currently running under power in my basement.
This is a great small business opportunity. It has done great by me for the few years I have had it. We are moving out of the region this spring and taking the machine with us will not be a viable option. I can supply you with contacts of companies and people I am doing work for if you are interested.
I have lots of pics and videos of the machine in operation along with pics of parts that I have made on the machine. Just send me an email and I’ll send them right out.
If you have any questions of need more info feel free to email me or call me at 401-486-0272.


http://www.youtube.com/user/TimPimentel3006#p/u/2/48z_scMcLrE

http://www.youtube.com/user/TimPimentel3006#p/u/3/RtUKNoJfZYk

http://www.youtube.com/user/TimPimentel3006#p/u/4/EcEH5DEPpMs