CNC Table 3 axis - 4' x 10' 25HP Vacuum -- EVERYTHING INCLUDE *DIY $7500

This was a CNC table I build a few years back. We used it to cut wood, aluminum, foam, and lot more.
This is a 3 axis machine.

The CNC table that can accept up to 4'x10' sheets. Cutting area of 44" x 110".
Traverse speed of 800 ips. Cuts fast, pretty accurate.

Includes:
Computer -- Mach 3 Software
Drivers --
25HP Thomas Blower for the hold down.. -- This alone was $5K.

You will probably need to make a new hold down bed. We used LDF for the top of it. Works great. Spent
around $20K building this thing. Need to get it out of our office since we have switched businesses. 

This would be good for sign makers, cabinet makers, car audio installers or anyone who want to cut
some neat stuff. This table can be built out even larger if you wanted. The width of the gantry is 118" so
technically it can be extended to as long as you want. 

Please email me @ jerry@directsignoutlet.com for more information or call the office at 415-642-5900 x 5920.

Hope someone can take please with this machine.  Literally  -- Blood, Sweat, and tears went into building this thing.  It was fun, and runs great.